Calificación 5.0 de 5. 1 opinión.
1 calificación
en 6 cuotas de sin interés
¡Última disponible!
MercadoLíder | +100 ventas
MercadoLíder
¡Uno de los mejores del sitio!
+100
Ventas concretadas
Brinda buena atención
Entrega sus productos a tiempo
Compra Protegida con Mercado Pago
Recibe el producto que esperabas o te devolvemos tu dinero
Garantía del vendedor
Garantía de fábrica: 12 meses
Tarjetas de crédito
¡Cuotas sin interés con bancos seleccionados!
Tarjetas de débito
Marca | Genérica |
---|
Specifica984311532tions:
Working voltage: 80 ~ 260VAC
Test voltage: 80 ~ 260VAC
Rated power: 100A/22000W
Working frequency: 45-65Hz
Measurement accuracy: 1.0
Size: 89.6*49.6*24.4mm(Length*Wide*High)
LCD screen: 51*30mm(Length*Wide)
Color: Black
About function
- Measure and monitor the electrical parameters (voltage, current, kWh, watt)
- Overload alarm function (more than watt alarm threshold , backlight flashing)
- Power alarm threshold preset function (can set up their own power alarm threshold)
- Power(kWh) button reset function
- When power off, store the data, when on, continue the date
- Large screen LCD liquid crystal screen full display function (voltage, current, kWh, watt)
- Backlight function.
About Display
Display interface. By the large screen LCD display LCD monitor voltage and current, kWh, watt, electric parameters
- Watt: the measurement range of 0~10kW
less than 1kW: 0.0~999.9W
less than 10kW: 1000~9999W
- kWh: the measurement range of 0~9999kWh
less than 10kWh: 0~9999Wh
more than 10kWh:10~9999kWh
- The test voltage range of 6.5-100V DC
Display format 6.50~99.99V
- Current test range: 0~100A
Display format 0.00~99.99A
About Button
- Backlight control
Can turn on/off backlight by short press
- Power rese
Step 1: long time press the button ( about 5 seconds), til display flicker, then release the button
Step 2: if short time press the button again, then power(kWh) reset zero and exit flicker
Step 3: if long press button for 5 seconds until it is no longer flicker, power(kWh) data is not cleared and exit
- Set the alarm (watt
Step 1: long press the button, till the LCD screen display "SET CLr", release the button
Step 2: show the alarm(voltage) value, short time press, value(number) increase. don't press the button for 3 seconds, the setting switch to other bit
Step 3: long time press the button(about 5 seconds) ----> save the threshold voltage value
Threshold setting watt range: 6.5v-99.99v
Package included: 1pc
Note:
1.Under the influence of light and the display, the color difference may decrease slightly.
2.Due to manual measurement, please allow size differences about 1-3cm. Thank you for your understanding.