Hasta 12 cuotas

Entrega a acordar con el vendedor

Milagro, Guayas

Información sobre el vendedor

  • 100%

    de compradores lo recomiendan

  • 16 años

    vendiendo en Mercado Libre

  • 1038

    ventas concretadas

Ver más datos de este vendedorSe abrirá en una nueva ventana

Garantía

Compra Protegida con Mercado Pago

Recibe el producto que esperabas o te devolvemos tu dinero

Garantía del vendedor

Garantía de fábrica: 12 meses

Descripción

LED PWM DC Motor Speed Switch Regulator 5A 150W Dimmer Controller

Features

Soft-start function, When starting the motor, the current increases slowly, without inrush current, which effectively protects the motor

Digital encoder knob, High precision and better consistency, than normal potentiometer, Better than ordinary potentiometer
Adjustable duty cycle, duty cycle upper and lower limit, minimum change value of duty cycle
With start-stop knob, and can be controlled by an external switch

Note: the motor will turn on when power is on by default

Parameters

Operating voltage: DC 5-30V , input reverse polarity protection
Rated amperage: 5A , maximum instantaneous amps is 15A
Duty cycle: 0-100% , default step value 1%
Dimensions: 78.5mm x 43mm x 26mm / 3.09 x 1.69 x 1.02 inches

Encoder knob operation instructions

1. in default display interface (default is shows duty cycle)
- short-press: turn on/off motor
- long-press for 10 seconds: enter setting interface
- anticlockwise rotation: reduced duty cycle
- clockwise rotation: increased duty cycle

2. in setting interface
- short-press: choose setting parameters: duty cycle upper limits , lower limits and stepper value
- duty cycle lower limit: if set as "L00-L80", the duty cycle will be between 0-80%
- duty cycle upper limit: if set as "H00-H99 or 100", the duty cycle will be between 0-100
- stepper value(the minimum change) choose: "A01 , A02 , A05 , A10 , A20 , A25 ", which is 1% , 2% , 5% , 10% , 20% , 25% , optional
- anticlockwise rotation: the corresponding parameter value decreases
- clock rotation: the corresponding parameter value increases
- long-press knob to exit seeting interface

"STOP" port back of board

it can be connected switch button or 3.3V level , Do not use in complex electromagnetic environment, No protection inside the circuit

(Note that the external switch should use a self-return button or key)


After all setting parameters are running, the last setting is automatically stored after power off

Package Included:

1 * DC Motor speed controller

Preguntas y respuestas

¿Qué quieres saber?

Nadie ha hecho preguntas todavía. ¡Haz la primera!